vcos & plos - smt 9 9 - 108 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com hmc513lp5 / 513lp5e mmic vco w/ half frequency output & divide-by-4, 10.43 - 11.46 ghz v00.0405 general description features functional diagram the hmc513lp5 & HMC513LP5E are gaas ingap heterojunction bipolar transistor (hbt) mmic vcos. the hmc513lp5 & HMC513LP5E integrate resonators, negative resistance devices, varactor diodes and feature half frequency and divide-by- 4 outputs. the vcos phase noise performance is excellent over temperature, shock, and process due to the oscillators monolithic structure. power output is +7 dbm typical from a +3v supply voltage. the prescaler function can be disabled to conserve current if not required. the voltage controlled oscillator is packaged in a leadless qfn 5x5 mm surface mount package, and requires no external matching components. dual output: fo = 10.43 - 11.46 ghz fo/2 = 5.21 - 5.73 ghz pout: +7 dbm phase noise: -110 dbc/hz @100 khz typ. no external resonator needed qfn leadless smt package, 25 mm 2 typical applications low noise mmic vco w/half frequency, divide-by-4 outputs for: ? vsat radio ? point to point/multipoint radio ? test equipment & industrial controls ? military end-use electrical specifications, t a = +25 c, vcc1, vcc2 = +3v parameter min. typ. max. units frequency range fo fo/2 10.43 - 11.46 5.215 - 5.73 ghz ghz power output rfout rfout/2 rfout/4 +5 +5 -10 +10 +11 -4 dbm dbm dbm ssb phase noise @ 100 khz offset, vtune= +5v @ rfout -110 dbc/hz tune voltage vtune 2 13 v supply current icc1 & icc2 240 275 290 ma tune port leakage current (vtune= 13v) 10 a output return loss 2db harmonics/subharmonics 1/2 3/2 2nd 3rd 32 26 15 28 dbc dbc dbc dbc pulling (into a 2.0:1 vswr) 5mhz pp pushing @ vtune= 5v 25 mhz/v frequency drift rate 1mhz/c
vcos & plos - smt 9 9 - 109 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com frequency vs. tuning voltage, t= 25c sensitivity vs. tuning voltage, vcc= +3v ssb phase noise vs. tuning voltage frequency vs. tuning voltage, vcc= +3v output power vs. tuning voltage, vcc= +3v ssb phase noise @ vtune= +5v 9.4 9.6 9.8 10 10.2 10.4 10.6 10.8 11 11.2 11.4 11.6 11.8 012345678910111213 vcc=2.75v vcc=3.0v vcc=3.25v output frequency (ghz) tuning voltage (volts) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 012345678910111213 +25 c +85 c -40 c output power (dbm) tuning voltage (volts) 0 100 200 300 400 500 600 012345678910111213 +25 c +85 c -40 c sensitivity (mhz/volt) tuning voltage (volts) 9.4 9.6 9.8 10 10.2 10.4 10.6 10.8 11 11.2 11.4 11.6 11.8 012345678910111213 +25 c +85 c -40 c output frequency (ghz) tuning voltage (volts) -160 -140 -120 -100 -80 -60 -40 -20 0 10 3 10 4 10 5 10 6 10 7 +25 c +85 c -40 c ssb phase noise (dbc/hz) offset frequency (hz) -120 -115 -110 -105 -100 -95 -90 -85 -80 -75 -70 12345678910111213 10khz offset 100khz offset ssb phase noise (dbc/hz) tuning voltage (volts) hmc513lp5 / 513lp5e mmic vco w/ half frequency output & divide-by-4, 10.43 - 11.46 ghz v00.0405
vcos & plos - smt 9 9 - 110 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com rfout/2 frequency vs. tuning voltage, vcc= +3v rfout/2 output power vs. tuning voltage, vcc= +3v divide-by-4 frequency vs. tuning voltage, vcc= +3v divide-by-4 output power vs. tuning voltage, vcc= +3v 2.35 2.4 2.45 2.5 2.55 2.6 2.65 2.7 2.75 2.8 2.85 2.9 2.95 012345678910111213 +25 c +85 c -40 c output frequency (ghz) tuning voltage (volts) -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 012345678910111213 +25 c +85 c -40 c output power (dbm) tuning voltage (volts) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 012345678910111213 +25 c +85 c -40 c output power (dbm) tuning voltage (volts) 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 012345678910111213 +25 c +85 c -40 c output frequency (ghz) tuning voltage (volts) mmic vco w/ half frequency output & divide-by-4, 10.43 - 11.46 ghz v00.0405 hmc513lp5 / 513lp5e
vcos & plos - smt 9 9 - 111 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com absolute maximum ratings outline drawing vcc1, vcc2 +3.5 vdc vtune 0 to +15v junction temperature 135 c continuous pdiss (t=85 c) (derate 27 mw/c above 85 c 1.3 w thermal resistance (junction to ground paddle) 37.5 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c typical supply current vs. vcc note: vco will operate over full voltage range shown above. vcc (v) icc (ma) 2.75 230 3.0 275 3.25 320 electrostatic sensitive device observe handling precautions notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative. 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. part number package body material lead finish msl rating package marking [3] hmc513lp5 low stress injection molded plastic sn/pb solder msl1 [1] h513 xxxx HMC513LP5E rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h513 xxxx [1] max peak re ow temperature of 235 c [2] max peak re ow temperature of 260 c [3] 4-digit lot number xxxx package information mmic vco w/ half frequency output & divide-by-4, 10.43 - 11.46 ghz v00.0405 hmc513lp5 / 513lp5e
vcos & plos - smt 9 9 - 112 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pin number function description interface schematic 1-3, 5, 7-11, 13-18, 20, 22-28, 30-32 n/c no connection. these pins may be connected to rf/ dc ground. performance will not be affected. 4rfout/4 divide-by-4 output 6vcc1 supply voltage for prescaler. if prescaler is not required, this pin may be left open to conserve 40 ma of current. 12 rfout/2 half frequency output (ac coupled). 19 rfout rf output (ac coupled). 21 vcc2 supply voltage, +3v 29 vtune control voltage input. modulation port bandwidth dependent on drive source impedance. gnd package bottom has an exposed metal paddle that must be connected to rf/dc ground. pin descriptions mmic vco w/ half frequency output & divide-by-4, 10.43 - 11.46 ghz v00.0405 hmc513lp5 / 513lp5e
vcos & plos - smt 9 9 - 113 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com the circuit board used in the nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and backside ground paddle should be con- nected directly to the ground plane similar to that shown. a suf cient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. evaluation pcb list of materials for evaluation pcb 110227 [1] item description j1 - j4 pcb mount sma rf connector j5 - j6 2 mm dc header c1 - c2 100 pf capacitor, 0402 pkg. c3 1,000 pf capacitor, 0402 pkg. c4 - c5 2.2 f tantalum capacitor u1 hmc513lp5 / HMC513LP5E vco pcb [2] 1102 25 eval b oard [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 mmic vco w/ half frequency output & divide-by-4, 10.43 - 11.46 ghz v00.0405 hmc513lp5 / 513lp5e
vcos & plos - smt 9 9 - 114 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com typical application circuit mmic vco w/ half frequency output & divide-by-4, 10.43 - 11.46 ghz v00.0405 hmc513lp5 / 513lp5e
vcos & plos - smt 9 9 - 115 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com notes: mmic vco w/ half frequency output & divide-by-4, 10.43 - 11.46 ghz v00.0405 hmc513lp5 / 513lp5e
|
